Have a question?     Call 952.469.8240    |    Need service or parts?    Call 952.469.8230
 
Home  » Industrial Ovens   » Benchtop and Lab Ovens   » LCC and LCD Clean Process Oven
 
Despatch LCC1-51 industrial benchtop oven stacked to save space in lab - made in USA - Ships in 3 days
 

LCC AND LCD CLEAN PROCESS BENCHTOP OVEN

Despatch's LCC and LCD Clean Process Benchtop Ovens have a stainless steel interior and exterior, rugged, programmable process controls and provide a variety of tailored options for your specific needs.

For production environment processes where minimal contamination is essential, the LCC and LCD Series benchtop ovens offer the highest standards in HEPA filtration. Re-circulated airflow is 100% HEPA filtered for operation at ISO Class 5 (Class 100) or better within the oven chamber. Also available in a non-HEPA filter option.

Typical applications for these ovens include die-bond curing and other semiconductor packaging processes, depyrogenation, sterilizing and drying for life sciences. The ovens are configured for 220-240 volts, 1 phase, 50-60 Hz. These units are stackable to save valuable floor space and provide maximum ergonomic efficiency for operators. The recirculation motor is mounted at the rear of the oven, providing convenient access and allowing up to three ovens to be stacked on top of one another, while still keeping loading heights ergonomically acceptable.

It is available in two different atmosphere configurations:

Air Atmosphere | A forced exhaust fan is included on the air temperature unit for rapid cooling.

Inert Atmosphere | Allows nitrogen (or other inert gas) to be injected into the chamber to lower the oxygen level to prevent oxidation of products. A water cooling coil is provided for rapid cooling. Control of nitrogen flow and water cooling is programmable through the Protocol 3™ controller.

Larger Sizes Available | LCC/LCD2-14 Clean Process Ovens meet the demands of production and large scale R&D efforts.

Advanced control | Protocol 3™ is a microprocessor-based temperature and hi-limit controller with large LCD display and real time clock for auto start capability. The LCD display shows temperature readings along with clear, detailed information on oven status. Protocol 3™ features three operating modes for quick and easy operation: Manual mode, Timer mode and Pro.file mode. The data-logging functionality enables reporting and analyzing and data files can be exported via the controller's USB port. Modbus RS485 communications are included for easy data access.

Remote operation, programming and data logging | The Despatch Protocol Manager network utility software enables the operation of up to 32 Protocol 3™ and/or Protocol Plus controllers from a single, remote PC using RS485 communication.

More information on Protocol Manager Software

LCC / LCD Spec SheetLCC / LCD Spec Sheet (lab oven)

LCC / LCD Spec SheetLCC/LCD2-14 (cabinet oven)

 
 

Standard Features:
  • LCD: 350°C (662°F) maximum temperature
  • LCC: 260°C (500°F) maximum temperature
  • Lockable Disconnect Switch on the control panel for easy servicing
  • Protocol 3™ control with large LCD display, integrated data logging capabilities and USB port for simple oven set-up and data export
  • Stainless steel interior with all interior seams continuously welded on the insulation side to protect the work chamber from contamination
  • Programmable door lock prevents operators from opening oven door when cycle is in process
  • Door Interlock switch turns off heater when door is open
  • Recirculated airflow is 100% HEPA (High Efficiency Particulate Air) filtered for ISO Class 5 (Class 100) operation throughout the process cycle
  • Magnehelic™ gauge monitors the HEPA filter pressure drop so you know when it is time to replace the filter
  • Electric door release for ergonomic operation
  • UL & C-UL Listed open control panel
  • Modbus communications connection (RS485) for remote monitoring and recording
  • End of cycle and high limit audible and visual alarm, that can be seen and heard from a distance

 

 

 

 

Options:
  • Silicone-free construction
  • Non-HEPA filtration model
  • Fast rate HEPA filter
  • Door interlock switch turns off heater and fan when door is opened
  • Chart recorders
  • Three color process stack light
  • Skirted stands with leveling legs
  • Extra shelves
  • Data acquisition Protocol Manager software
  • Nitrogen atmosphere
  • 280 volt service
  • CE compliance
Use this form for faster connection to your local product specialist
Don't worry, we won't share your info.