Have a question? Call 952.469.8240 | Need service or parts? Call 952.469.8230

PTC Top Loading Test Oven

The PTC is a top-loading oven specifically designed for burn-in, qualification testing and calibration of oil and gas downhole drilling instruments. The test oven simulates downhole temperature conditions and validates that the instruments will work properly and accurately throughout the run.

PTC Non-Magnetic Test Oven

Despatch PTC ovens are specifically designed for burn-in, calibration and qualification testing of downhole electronic logging equipment for the oil and gas industry. Non-magnetic configurations with a fiberglass oven body and structural supports are available for electromagnetic instrument testing. These ovens come in 12 and 20 foot chamber lengths and have a maximum temperature of 400˚F (204˚C)

PBC and PNC Burn-In Cabinet Oven

These burn-in cabinet ovens are engineered specifically for applications such as high dissipation forward bias, high-temperature reverse bias, dynamic and static burn-in of IC, RAM, ROM, microprocessors and other semiconductor devices. Available in air and nitrogen atmosphere.

RBC Benchtop Burn-In Oven

Despatch’s RBC Burn-In Benchtop Ovens offer maximum flexibility for small lot qualification testing, burn-in, reliability testing, and research and development. High volume recirculation fans maintain consistent, uniform temperatures required by MIL STD 883 while removing heat generated by the load.

PRVO Paint Sample Testing oven

The PRVO is designed for small batch laboratory testing of paint finishes used in automotive and other high volume applications. The PRVO has the ability to test paints, including flammable solvent based paints, for temperature, ramp rates, curing time with gas or electric heat. Controls are conveniently located on the front of the oven, including the fresh air control.

Qmax Benchtop Test Oven

The Qmax oven is designed to meet the frequent air changes and tight temperature uniformity required of the ASTM 5423 Type I & Type II oven specification while tested according to ASTM 5374. These ovens can be used for applications such as thermal evaluation of electrical insulating materials, testing and other thermal applications where tight temperature unifomity is required.

Home » Applications » Industrial Burn-In Ovens and Industrial Test Oven

BURN-IN OVENS AND TEST OVENS

Burn-in Ovens
Integrated Circuits (IC’s) and other electronic devices are burned in at elevated temperatures to stress and exercise the devices under test. The high temperatures force early failure, known as “infant mortality”, at this point rather than later when they are in use in a finished product. This dramatically improves the reliability of the product.

Despatch burn-in ovens are engineered specifically for applications such as high dissipation forward bias, high-temperature reverse bias, dynamic and static burn-in of IC, RAM, ROM, microprocessors and other semiconductor devices.

During burn-in the temperature rises as the air travels across the chamber due to the heat dissipated by the devices. High volume recirculation fans maintain consistent, uniform temperatures required by MIL STD 883 while removing heat generated by the load.

Test Ovens
Despatch offers several ovens that are specifically designed to meet your testing needs. Top-loading PTC ovens are used for burn-in and performance qualification testing of down-hole electronic logging equipment. Typical processes include simulating down-hole conditions for oil well drilling and calibration.

The Qmax Benchtop oven delivers the frequent air changes and uniformity required by ASTM 5423 Type I & Type II. These ovens can be used for applications such as thermal evaluation of electrical insulating materials and other testing applications where tight temperature uniformity is required

The PRVO is a batch oven designed for laboratory testing of paint finishes used in automotive and other high volume applications. The PRVO has the ability to test paints, including flammable solvent based paints, for temperature, ramp rates, curing time with gas or electric heat.

Custom Burn-In Ovens and Test Ovens

Burn-In of Semiconductor Devices

Manufacturers of ICs, RAM and ROM modules, microprocessors and other semiconductor devices use ovens to test or burn-in their devices at elevated temperatures to identify early product failures and ensure long-term reliability. Many customized solutions are available to meet customer needs. We work with customers to provide custom controls, loading and unloading, cooling systems and more. Despatch also offers the standard model PBC/PNC Burn-in Chambers which are ideal for semiconductor burn-in and testing.

Despatch designed a custom LCC oven configured for Class A environments with the controls repositioned on the side of the oven. The front of the oven was attached to an isolation barrier to allow both the load and unload areas to be located in clean room environments.

CONTACT SERVICE / PARTS

CONTACT SALES REP

Use this form for faster connection to your local product specialist

Don't worry, we won't share your info.